The OPERA REEVO 210 and 212 are two new point-source models from dBTechnologies that offer exceptional sound quality and low-end extension. They feature a Quasi 3-way configuration, coaxial acoustic design, and low noise reflex ports. Equipped with a Class-D Digipro G2 amplifier, they deliver 1050 W RMS and 2100 W Peak power and offer factory-tailored voicing presets to adapt to different scenarios. The compact design allows them to be used as a wedge stage monitor or on a classic speaker stand support, and they can be mounted on a standard pole or suspended thanks to integrated (3) M10 threaded eyebolts. Despite their small size, they feature 2x Neodymium woofers and one 1.75” coaxial compression driver, with an output SPL of 132.5 dB (REEVO 210) and 133 dB (REEVO 212). The voicing ensures seamless and transparent rendition of any speech, with a very wide nominal dispersion of 100°x80° (REEVO 212) and 100°x90° (REEVO 210), providing consistent coverage from every listening position.

Specifications:

• Speaker Type: Quasi 3-Way Active Speaker
• Frequency Response:
  • [-10 dB]: 48 Hz – 20,000 Hz
  • [-6 dB]: 52 Hz – 19,200 Hz
• Max SPL: 133 dB
• High Frequency Driver:
  • Exit: 1″
  • Type: Compression Driver
  • Voice Coil: 1.75″
• Horizontal Directivity: 100°
• Vertical Directivity: 80°
• Horn Type: Asymmetrical Horn
• Low Frequency Drivers:
  • 2x 12″ Neodymium
  • Voice Coil: 2.5″

Amplifier:

• Amplifier Technology: Digipro G2 with SMPS
• Amplifier Class: Class D
• RMS Power: 1050 W (525 W + 525 W)
• Peak Power: 2100 W (1050 W + 1050 W)

Processor:

• Controller: DSP 28/56 bit
• AD/DA Converter: 24 bit / 48 kHz
• Crossover Frequency: 1260 Hz
• Limiter: Peak, RMS, Thermal
• Advanced DSP Functions: Linear Phase FIR Filters

Input and Output:

• Input Signal: 1x Combo (XLR/Jack 6.3 mm) Line
• Output Signal: 1x XLR Male (True Link)
• Controls:
  • Gain (rotary)
  • Preset (Flat, Playback, Wedge)

Mechanical:

• Housing Material: Polypropylene
• Grille: Full grille
• Handles: 1 on left side, 1 on top
• Rigging Points: 2x M10 on top + 1x M10 on back
• Pole Mount: 36 mm
• Dimensions:
  • Width: 345 mm (13.58 in)
  • Height: 690 mm (27.17 in)
  • Depth: 376 mm (14.8 in)
• Weight: 20.4 kg (44 lbs)